GA-8SIML Motherboard
3 6
2F8/IRQ3
Enable onboard Serial port A and using daddress 2F8 , IRQ3.
3E8/IRQ4
Enable onboard Serial port A and using daddress 3E8 , IRQ4.
2E8/IRQ3
Enable onboard Serial port A and using daddress 2E8 , IRQ3.
Disabled
Disable onboard Serial port A.
Onboard Serial Port B
Auto
BIOS will automatically setup the port B address.
3F8/IRQ4
Enable onboard Serial port B and using daddress 3F8 , IRQ4.
2F8/IRQ3
Enable onboard Serial port B and using daddress 2F8 , IRQ3. (Default Value)
3E8/IRQ4
Enable onboard Serial port B and using daddress 3E8 , IRQ4.
2E8/IRQ3
Enable onboard Serial port B and using daddress 2E8 , IRQ3.
Disabled
Disable onboard Serial port B.
Serial Port B Mode
(This item allows you to select the IR modes if the serial port B is used as an IR port.Set at Normal , if
you use COM2 as the serial port as the serial port, instead as an IR port.)
ASKIR
Set onboard I/O chip UART to ASKIR Mode.
IrDA
Set onboard I/O chip UART to IrDa Mode.
Normal
Set onboard I/O chip UART to Normal Mode. (Default Value)
OnBoard Parallel port
This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/
O controller.
378/IRQ7
Enable On Board LPT port and using address 378, IRQ7.(Default Value)
278/IRQ5
Enable On Board LPT port and using address 278, IRQ5.
3BC/IRQ7
Enable On Board LPT port and using address 3BC, IRQ7.
Disabled
Disable onboard Parallel port.
Parallel Port Mode
This feature allows you to connect with an advanced print via the port mode it supports.
SPP
Using Parallel port as Standard Parallel Port.
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.(Default Value)
ECP+EPP
Using Parallel port as ECP & EPP mode.