2 1
Hardware Installation Process
L) J7 (2x11 pins jumper)
GN (Green Switch)
Open: Normal Operation
Close: Entering Green Mode
GD (Green LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
HD (IDE Hard Disk Active LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
SPK (Speaker Connector)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
RE (Reset Switch)
Open: Normal Operation
Close: Reset Hardware System
P-P-P+(Power LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 3: LED cathode(-)
PW (Soft Power Connector)
Open: Normal Operation
Close: Power On/Off
Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front
panel to the front panel jumper according to the pin assignment above.
G N
P-P-P+ PW
GD
RE
HD
SPK
1
1
1
1
1