Gigabyte GA-8I945G Pro Скачать руководство пользователя страница 32

GA-8I945G Pro/GA-8I945G Motherboard

- 32 -

English

2-1

Standard CMOS Features

Date

The date format is <week>, <month>, <day>, <year>.

Week

The week, from Sun to Sat, determined by the BIOS and is display only

Month

The month, Jan. Through Dec.

Day

The day, from 1 to 31 (or the maximum allowed in the month)

Year

The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master, Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Device Setup.  You can use one of three methods:

Auto

Allows BIOS to automatically detect IDE devices during POST(default)

None

Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.

Manual

User can manually input the correct settings

Access Mode Use this to set the access mode for the hard drive. The four options are:

CHS/LBA/Large/Auto(default:Auto)

Capacity

Capacity of currently installed hard disk.

Hard drive information should be labeled on the outside drive casing.  Enter the appropriate option
based on this information.

Cylinder

Number of cylinders

Head

Number of heads

Precomp

Write precomp

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

Standard CMOS Features

Date (mm:dd:yy)

Fri

, Mar  18 2005

Time (hh:mm:ss)

18:25:04

`

IDE Channel 0 Master

[None]

`

IDE Channel 0 Slave

[None]

Drive A

[1.44M, 3.5"]

Drive B

[None]

Floppy 3 Mode Suport

[Disabled]

Halt On

[All, But Keyboard]

Base Memory

640K

Extended Memory

511M

Total Memory

512M

KLJI

: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F3: Language

1

F5: Previous Values           F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help
Menu Level

`

Change the day, month,
year

<Week>
Sun. to Sat.

<Month>
Jan. to Dec.

<Day>
1 to 31 (or maximum
allowed in the month)

<Year>
1999 to 2098

Only for GA-8I945G Pro.

Содержание GA-8I945G Pro

























































































Отзывы: