Gigabyte GA-8I915P Duo Pro Скачать руководство пользователя страница 37

Страница: 37 / 88

BIOS Setup

- 37 -

English

On-Chip SATA Mode

Disabled

Disable this function.

Auto

BIOS will auto detect. (Default value)

Combined

Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on the
motherboard; 2 for SATA and the other for PATA IDE.

Enhanced

Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6
HDDs to use.

Non-Combined

Set On-Chip SATA mode to Non-Combined, SATA will be simulated to
PATA mode.

PATA IDE Set to

Ch.1 Master/Slave

Set PATA IDE to Ch. 1 Master/Slave.

Ch.0 Master/Slave

Set PATA IDE to Ch. 0 Master/Slave. (Default value)

SATA Port 0/2 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave.

SATA Port 1/3 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 0 Master/Slave, this function will auto set to Ch. 1 Master/Slave.

USB Controller

Enabled

Enable USB Controller. (Default value)

Disabled

Disable USB Controller.

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 Controller. (Default value)

Disabled

Disable USB 2.0 Controller.

USB Keyboard Support

Enabled

Enable USB Keyboard Support.

Disabled

Disable USB Keyboard Support. (Default value)

USB Mouse Support

Enabled

Enable USB Mouse Support.

Disabled

Disable USB Mouse Support. (Default value)

Azalia Codec

Auto

Auto detect Azalia audio function. (Default value)

Disabled

Disable Azalia audio function.

Front Panel Type

If you connect HD Audio Panel to the AZALIA_FP connector, set this item to

HD Audio

. If you

connect AC97 Audio Panel to the AZALIA_FP connector, set this item to

AC97

AC97

Set front audio panel type to AC97.

HD Audio

Set front audio panel type to HD Audio. (Default value)

Only for GA-8I915P Duo Pro.

Содержание GA-8I915P Duo Pro

























































































Результаты поиска

Содержание GA-8I915P Duo Pro

Отзывы:

Бренды по названию

Популярные бренды

Gigabyte GA-8I915P Duo Pro, Руководство пользователя

Результаты поиска

Содержание GA-8I915P Duo Pro

Отзывы:

Бренды по названию

Популярные бренды