SATA Hard Drives Configurations (Intel ICH6R)
- 12 -
Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 20 below
will appear. Use the ARROW keys to select
Intel(R) 82801FR SATA RAID Controller
* and press
ENTER
.
Then it will begin to load the SATA driver from the floppy disk.
Figure 17
"*"
If your southbridge is ICH6R, select
Intel(R) 82801FR
(ICH6R).
If your southbridge is ICH5R, select
Intel(R) 82801ER
(ICH5R).
Figure 18
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA driver again from the motherboard driver CD.
Step 4:
When the screen as shown below appears, press ENTER to continue the SATA driver installation from
the floppy disk. The driver installation will be finished in about one minute.
