Gigabyte GA-8I915P-D, Руководство пользователя

Страница: 44 / 80

GA-8I915P-D Pro Motherboard - 44 -
English
CPU Host Clock Control
Please note that if y our system is ov erclocked and cannot restart, please w ait 20secs.
for automatic sy stem restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control. (Default v alue)
Enabled Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
This item w ill be av ailable w hen "CPU Host Clock Control" is set to Enabled.
100MHz ~ 355MHz Set CPU Host Clock from 100MHz to 355MHz.
If y ou use FSB800 Pentium 4 processor, please set "CPU Host Frequency " to 200MHz.
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
Memory Frequency For
Wrong frequency may make sy stem can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency =533MHz,
2.5 Memory Frequency = Host clock X 2.5.
3 Memory Frequency = Host clock X 3.
4 Memory Frequency = Host clock X 4.
Auto Set Memory frequency by DRAM SPD data. (Default v alue)
for FSB(Front Side Bus) frequency =800MHz,
1.66 Memory Frequency = Host clock X 1.66.
2.00 Memory Frequency = Host clock X 2.
2.66 Memory Frequency = Host clock X 2.66.
3.00
(Note)
Memory Frequency = Host clock X 3.
Auto Set Memory frequency by DRAM SPD data. (Default v alue)
Memory Frequency (Mhz)
The values depend on "Memory Frequency For" item.
DIMM OverVoltage Control
Please note that by ov erclocking y our sy stem through the increase of the DIMM v oltage, damage to the
memory may occur.
Normal Set DIMM Ov erVoltage Control to Normal. (Default v alue)
+0.1V Set DIMM Ov erVoltage Control to +0.1V.
+0.2V Set DIMM Ov erVoltage Control to +0.2V.
+0.3V Set DIMM Ov erVoltage Control to +0.3V.
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
PCI-E OverVoltage Control
Normal Set PCI-E Ov erVoltage Control to Normal. (Default v alue)
+0.1V Set PCI-E Ov erVoltage Control to +0.1V.
+0.2V Set PCI-E Ov erVoltage Control to +0.2V.
+0.3V Set PCI-E Ov erVoltage Control to +0.3V.
CPU Voltage Control
Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default v alue: Normal)
Warning: CPU may be damaged or reduce CPU life-cy cle w hen CPU is ov er-v oltage.
Normal CPU Vcore
Display y our CPU Vcore Voltage.
(Note) To use a DDRII 600 memory module on the motherboard, y ou must install an 800MHz FSB
processor and set
Memory Frequency For
to
3.00
.