manualshive.com logo in svg

Gigabyte GA-8I915G Duo, Руководство пользователя

Поделиться
Скачать
Gigabyte GA-8I915G Duo Скачать руководство пользователя страница 21

Hardware Installation

- 21 -

English

7) FDD (Floppy Connector)

The FDD connector is used to connect the FDD cable while the other end of the cable connects to the
FDD drive. The types of FDD drives supported are: 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB.
Please connect the red power connector wire to the pin1 position.

8/9) IDE1/IDE2/IDE3 (IDE Connector)

An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one
IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive).
If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the
other as Slave (for information on settings, please refer to the instructions located on the IDE device).
To ensure that an IDE CD-ROM drive can work properly, please attach it to the IDE 1 connector.

1

2

33

34

1

2

39

40

Содержание GA-8I915G Duo

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды