Gigabyte GA-8GNXP-D Скачать руководство пользователя страница 37

Страница: 37 / 88

BIOS Setup

- 37 -

English

On-Chip SATA Mode

Disabled

Disable this function.

Auto

BIOS will auto detect. (Default value)

Combined

Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on the
motherboard; 2 for SATA and the other for PATA IDE.

Enhanced

Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6
HDDs to use.

Non-Combined

Set On-Chip SATA mode to Non-Combined, SATA will be simulated to
PATA mode.

PATA IDE Set to

Ch.1 Master/Slave

Set PATA IDE to Ch. 1 Master/Slave. (Default value)

Ch.0 Master/Slave

Set PATA IDE to Ch. 0 Master/Slave.

SATA Port 0/2 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave.

SATA Port 1/3 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 0 Master/Slave, this function will auto set to Ch. 1 Master/Slave.

USB Controller

Enabled

Enable USB controller. (Default value)

Disabled

Disable USB controller.

USB 2.0 Controller

You can disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 controller. (Default value)

Disabled

Disable USB 2.0 controller.

USB Keyboard Support

Enabled

Enable USB keyboard support.

Disabled

Disable USB keyboard support. (Default value)

USB Mouse Support

Enabled

Enable USB mouse support.

Disabled

Disable USB mouse support. (Default value)

Azalia Codec

Auto

Auto detect Azalia audio function. (Default value)

Disabled

Disable Azalia audio function.

Onboard H/W 1394

Enabled

Enable onboard IEEE1394 function. (Default value)

Disabled

Disable this function.

Onboard H/W SATA

Enabled

Enable onboard H/W SATA function. (Default value)

Disabled

Disable this function.

H/W SATA Function

RAID

Set onboard H/W SATA function as RAID. (Default value)

BASE

Set onboard H/W SATA function as base.

Содержание GA-8GNXP-D

























































































Результаты поиска

Содержание GA-8GNXP-D

Отзывы:

Бренды по названию

Популярные бренды

Gigabyte GA-8GNXP-D, Руководство пользователя

Результаты поиска

Содержание GA-8GNXP-D

Отзывы:

Бренды по названию

Популярные бренды