BIOS Setup
29
C
Floppy Drive A/B
This category identifies the type of floppy disk drive A or drive B that have been installed in the
computer.
8
None
No floppy driv e installed
8
1.2MB, 3.5 in.
3.5 inch AT-ty pe high-density driv e; 1.2M by te capacity
8
720K, 3.5 in.
3.5 inch double-sided driv e; 720K by te capacity
8
1.44M, 3.5 in.
3.5 inch double-sided driv e; 1.44M by te capacity .
8
2.88M, 3.5 in.
3.5 inch double-sided driv e; 2.88M by te capacity .
C
IDE Pr imary Master, Slave / Secondar y Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer.
There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will
automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If y ou select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
}
TYPE
1-50: Predefined ty pes.
Users: Set parameters by User.
Auto: Set parameters autom atically. (Default Vaules)
CD-ROM: Use for ATAPI CD-ROM driv es or double click [Auto] to set all HDD parameters
automatically .
8
Cy linders
Number of cy linders
8
Write Precompensation
Write precompensation
8
Sectors
Number of sectors
8
Max imum Capacity
Max imum Capacity
8
LBA Mode
This field show s if the dev ice ty pe in the specific IDE channel
support LBA Mode
8
Block Mode
This field only show s the information of Block Mode.