Gigabyte GA-8AENXP-DW, Руководство пользователя

Страница: 14 / 104

GA-8AENXP-DW Motherboard - 14 -
English
CPU Š Supports the latest Intel ® Pentium ® 4 LGA775 CPU
Š
Supports 1066/800/533MHz FSB
Š
L2 cache varies with CPU
Chipset
Š
Northbridge: Intel
®
925XE Express Chipset
Š
Southbridge: Intel
®
ICH6R
Memory
Š
4 DDR II DIMM memory slots (supports up to 4GB memory)
(Note 1)
Š
Supports dual channel DDR II 711/600/533/400 unbuffered DIMM
(Note 2)
Š
Supports 1.8V DDR II DIMM
Slots
Š
1 PCI Express x 16 slot
Š
2 PCI Express x 1 slots
Š 3 PCI slots
IDE Connections Š 1 port from ICH6R (IDE1) (UDMA 33/ATA 66/ATA 100), allows connection of
2 IDE devices
Š 1 port from PDC20779 (IDE2)(UDMA 33/ATA 66/ATA 100/ATA 133), allows
connection of 2 IDE hard drives
FDD Connections Š 1 FDD connection, allows connection of 2 FDD devices
Onboard SATA
Š
4 SATA ports from ICH6R controller (SATA0_SB, SATA1_SB, SATA2_SB,
SATA3_SB);
Š 4 SATA ports from SiI3114 controller (SATA0_SII, SATA1_SII, SATA2_SII,
SATA3_SII)
Š
2 SATA II ports from PDC20779 controller (SATA0_PR, SATA1_PR)
Peripherals
Š
1 parallel port supporting Normal/EPP/ECP mode
Š
8 USB 2.0/1.1 ports (rear x 4, front x 4 via cable)
Š
3 IEEE1394b ports (requires cable)
Š
Onboard COMA connection
Š
1 front audio connector
Š
1 IR connector
Š 1 PS/2 keyboard port
Š 1 PS/2 mouse port
Onboard LAN Š Onboard Marvell 8053 chip (10/100/1000 Mbit) (LAN1/LAN2)
Š 2 RJ45 ports
Onboard Audio Š ALC880 CODEC
Š Supports Jack Sensing function
Š
Supports 2 / 4 / 6 / 8 channel audio
Š
Supports Line In ; Line Out (Front Speaker Out) ; MIC ; Surround Speaker
Out (Rear Speaker Out) ; Center/Subwoofer Speaker Out ; Side Speaker
Out connection
Š
SPDIF In/Out connection
Š
CD In connection
1-2 Feature Summary
(Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage
and therefore the actual memory size is less than the stated amount. For example, 4 GB of
memory size will instead be shown as 3.xxGB memory during system startup.
(Note 2) To use a DDRII 711 memory module on the motherboard, you must install an 1066MHz FSB
processor and overclock in BIOS. To use a DDRII 600 memory module on the motherboard,
you must install an 800MHz FSB processor and overclock in BIOS.