Gigabyte GA-890FXA-UD5, Руководство пользователя, Страница: 99 / 120

- 99 - Appendix
Rebuilding an Array:
Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies
only to fault-tolerant arrays such as RAID 1, RAID 5, or RAID 10. To replace the old drive, make sure to use a
new drive of equal or greater capacity. The procedures below assume a new drive is added to replace a failed
drive to rebuild a RAID 1 array.
For the AMD SB850:
While in the operating system, make sure the chipset drivers have been installed from the motherboard driver
disk. Then launch the
AMD RAIDXpert from All Programs in the Start Menu .
Step 1:
Enter the login ID and password (default: "admin"),
and then click
Sign in to launch AMD RAIDXpert .
Step 2:
Select the RAID array to be rebuilt under
Logical
Drive View and click the Rebuild tab in the Logi-
cal Drive Information pane.
Step 3:
Select one available drive and click
Start Now to
start the rebuilding process.
Step 4:
The rebuilding progress is displayed on the
screen and you can select
Pause / Resume /
Abort / Restart during the rebuilding process.
Step 5:
When done, the array's status on the
Information page
in the Logical Drive Information pane will display as
Functional .