12
GA-8SMML Motherboard
?
Please note that the DIMM module can only fit in one direction due to the one
notches. Wrong orientation will cause improper installation. Please change
the insert orientation.
Step 2: Install memory modules
The motherboard has 3 dual in-line memory module (DIMM ) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot
.The DIMM module can only fit in one direction due to the two notch. Memory size can vary between
sockets.
1. The DIMM slot has two notch, so the
DIMM memory module can only fit in
one direction.
2. Insert the DIMM memory module
vertically into the DIMM slot. Then
push it down.
3. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Reverse the installation steps when you wish to remove the DIMM module.
SDRAM
