Gigabyte GA-7TESH2-RH, Руководство пользователя

Страница: 24 / 75

2 4
Connector Introduction
7 ) F_PANEL (2X12 Pins Front Panel connector)
Please connect the power LED, PC speaker, reset switch and power switch of your chassis
front panel to the F_PANEL connector according to the pin assignment above.
Pin No. Signal Name Description
1. Power LED + Power LED Signal anode (+)
2. 5V standby
P5V Stand By Power
3. Pin reomoved Pin removed
4. ID LED+ ID LED Signal anode (+)
5. Power LED - Power LED Signal cathode(-)
6. ID LED - ID LED Signal cathode(-)
7. HD status LED+ Hard Disk LED Signal anode (+)
8. System ready LED+ System Fan Fail LED Signal anode (+)
9. HD status LED- Hard Disk LED Signal cathode(-)
10. System ready LED- System Fan Fail LED Signal cathode(-)
11. Power on switch
Power button
12. LAN1 active LED (-) LAN1 active LED Signal cathode(-)
13. GND
Ground
14. LAN1 active LED (+) LAN1 active LED Signal anode (+)
15. Reset switch Reset button Signal
16. SMBUS data SMBusData
17. GND
Ground
18. SMBUS clock SMBusClock
19. ID LED switch ID Switch Signal
20. CASEOPEN Chassis intrusion Signal
21. GND
Ground
22. LAN2 active LED (-) LAN2 active LED Signal cathode(-)
23. NMI switch NMI switch Signal
24. LAN2 active LED (+) LAN2 active LED Signal anode (+)
2 1
24
23