Gigabyte GA-586TX, Руководство пользователя

Страница: 108 / 112

Appendix B: Post Codes
B-4
46 Reserved
47 Reserved
48-4D Reserved
4E Manufacturing
POST Loop or
Display Messages Reboot if Manufacturing POST Loop pin is set.
Otherwise display any messages (i.e., any non-fatal
errors that were detected during POST) and enter
Setup.
4F Security Check Ask password security (optional).
50 Write CMOS Write all CMOS values back to RAM and clear screen.
51 Pre-boot Enable Enable parity checker.
Enable NMI, Enable cache before boot.
52 Initialize Option
ROMs Initialize any option ROMs present from C8000h to
EFFFFh.
F
When FSCAN option is enabled, will initialize
from C8000h to F7FFFh.
53 Initialize Time
Value Initialize time value in 40h: BIOS area.
60 Setup Virus Protect Setup virus protect according to Setup
61 Set Boot Speed Set system speed for boot
62 Setup NumLock Setup NumLock status according to Setup
63 Boot Attempt Set low stack.
Boot via INT 19h.
B0 Spurious If interrupt occurs in protected mode.
B1 Unclaimed NMI If unmasked NMI occurs, display
Press F1 to disable NMI, F2 reboot.
E1-EF Setup Pages E1 - Page 1, E2 - Page 2, etc.
FF Boot