manualshive.com logo in svg

Gigabyte GA - 586ATX, Руководство пользователя

Поделиться
Скачать
Gigabyte GA - 586ATX Скачать руководство пользователя страница 126

Appendix E : FCC Document

E-1

APPENDIX E: FCC DOCUMENT

FCC Compliance Statement:

This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this

equipment does cause interference to radio or television equipment reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to
which the receiver is connected

-Consult the dealer or an experienced radio/television technician for
additional suggestions

You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected
to the following two conditions:1) This device may not cause harmful
interference and 2) this device must accept any interference received,
including interference that may cause undesired operation.

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name: G.B.T. INC.

Address: 18305 Valley Blvd., Suite#A

LA Puent, CA 91744

Phone/Fax No: (818) 854-9338/ (818) 854-9339

hereby declares that the product

Product Name: 

Model Number:

Mother Board

GA-586ATX

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:   (1)   This device may not cause harmful interference,
and   (2)   this device must accept any inference received, including interference 
that may cause undesired operation.

Representative Person's Name:     ERIC LU

Signature:

Date:    Apr. 10, 1997

Eric    Lu

Содержание GA - 586ATX































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды