manualshive.com logo in svg

Gigabyte G492-ZD0, Руководство пользователя, Страница: 59 / 152

Поделиться
Скачать
Gigabyte G492-ZD0 Скачать руководство пользователя страница 59

- 39 -

BIOS Setup

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

U2_P0_P#

(Note1)  

Lanes Configuration

U2_P1_P#

(Note1)  

Lanes Configuration

Change the PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8, 
x4x4x4x4. Default setting is 

Auto

.

U2_P0_P# I/O ROM 

(Note1)

U2_P1_P# I/O ROM 

(Note1)

When enabled, this setting will initialize the device expansion ROM 
for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

U2_P0_P# Link Speed

(Note1)

U2_P1_P# Link Speed

(Note1)

Configure mezzanine PCIe max link speed.

Options available: Auto/Maximum/Gen1/Gen2/Gen3. 
Default setting is 

Auto

.

Onboard LAN Controller

(Note2)

Enable/Disable the onboard LAN devices.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN I/O ROM

(Note2) 

Enable/Disable the onboard LAN devices, and initializes device 
expansion ROM.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

PCI Devices Common Settings

Above 4G Decoding

Enable/Disable memory mapped I/O to 4GB or greater address 
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is 

Enabled

.

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support. 
Options available: Enabled/Disabled. Default setting is 

Enabled

.

(Note1)   This section is dependent on the available PCIe Slot.
(Note2)   This section is dependent on the available LAN controller.

Содержание G492-ZD0

























































































































































Отзывы:

Нет отзывов