Gigabyte G492-HA0 Скачать руководство пользователя страница 102

Страница: 102 / 110

BIOS Setup

- 102 -

5-5 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up
access passwords.

There are two types of passwords that you can set:

• Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

• User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable

this field, a Administrator Password must first be set. A user can only access and modify the

System Time, System Date, and Set User Password fields.

Parameter

Description

Administrator Password

Press [Enter] to configure the administrator password.

User Password

Press [Enter] to configure the user password.

Secure Boot

Press [Enter] to configure advanced items.

Содержание G492-HA0















































































































Результаты поиска

Содержание G492-HA0

Отзывы:

Gigabyte G492-HA0, Руководство пользователя, Страница: 102 / 110

Результаты поиска

Содержание G492-HA0

Отзывы: