Gigabyte G210-H4G Скачать руководство пользователя страница 52

Страница: 52 / 98

BIOS Setup

- 52 -

SATA Controller(s)

Enable/Disable the SATA controller.

Options available: Enabled/Disabled. Default setting is

Enabled

SATA Mode Selection

Select the on chip SATA type.

IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the

IDE emulation mode. This is not allowed to access RAID setup utility.

RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will

be allows access the RAID setup utility at boot time.

ACHI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID

function is disabled and cannot be access the RAID setup utility at boot time.

Options available: IDE/RAID/ACHI/Disabled. Default setting is

ACHI Mode

SATA Test Mode

Enable/Disable SATA Test Mode.

Options available: Enabled/Disabled. Default setting is

Disabled

Aggressive LPM Support

Enable PCH to aggressively enter link power state.

Options available: Enabled/Disabled. Default setting is

Enabled

SATA Controller Speed

Indicates the maximum speed that the SATA controller can support.

Options available: Default/Gen1/Gen2/Gen3. Default setting is

Default

Software Feature Mask Configuration

Press [Enter] for configuration of advanced items.

Serial Port 0/1/2/3/4/5

The category identifies Serial ATA type of hard disk that are installed in the computer.

System will automatically detect HDD type.

Port 0/1/2/3/4/5

Enable/Disable Port 0/1/2/3/4/5.

Options available: Enabled/Disabled. Default setting is

Enabled

Hot Plug (for Serial SATA Port 0/1/2/3/4/5)

Enable/Disable Hot Plug support for Serial ATA Port 0/1/2/3/4/5.

Options available: Enabled/Disabled. Default setting is

Disabled

External SATA (for Serial SATA Port 0/1/2/3/4/5)

Enable/Disable External SATA support for Serial ATA Port 0/1/2/3/4/5.

Options available: Enabled/Disabled. Default setting is

Disabled

SATA Device Type (for Serial SATA Port 0/1)

Define the SATA Device for Serial ATA Port 0/1.

Options available: Hard Disk Drive/Solid State Drive. Default setting is

Disabled

Spin Up Device (for Serial SATA Port 0/1/2/3/4/5)

On an edge detect from 0 to 1, the PCH starts a COMreset initialization to the device.

Options available: Enabled/Disabled. Default setting is

Disabled

Содержание G210-H4G



































































































Результаты поиска

Содержание G210-H4G

Отзывы:

Похожие инструкции для G210-H4G

Бренды по названию

Популярные бренды

Gigabyte G210-H4G, Руководство по обслуживанию

Результаты поиска

Содержание G210-H4G

Отзывы:

Похожие инструкции для G210-H4G

Бренды по названию

Популярные бренды