manualshive.com logo in svg

Gigabyte G182-C20, Руководство пользователя

Поделиться
Скачать
Gigabyte G182-C20 Скачать руководство пользователя страница 40

BIOS Setup

- 40 -

 Main 

 

This setup page includes all the items of the standard compatible BIOS.

 Advanced

 

This setup page includes all the items of AMI BIOS special enhanced features. 

 

(ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)

 Chipset

 

This setup page includes all the submenu options for configuring the functions of the North Bridge.

  Server Management

 

Server additional features enabled/disabled setup menus.

 Security

 

Change, set, or disable supervisor and user password. Configuration supervisor password allows you to 

restrict access to the system and BIOS Setup. 

 

A supervisor password allows you to make changes in BIOS Setup. 

 

A user password only allows you to view the BIOS settings but not to make changes.

 Boot

 

This setup page provides items for configuration of  the boot sequence. 

  Save & Exit

 

Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing 
<F10> can also carry out this task.) 

 

Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation 
message will exit BIOS Setup. (Pressing <Esc> can also carry out this task.)

Содержание G182-C20













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды