Gigabyte G-MAX N512, Руководство пользователя

Страница: 73 / 85

61
G-MAX
TM
N512 User’s Manual
Frequently Asked Questions
This is a list of possible situations that may arise during the use of your
notebook computer G-MAX N512, and it gives easy answers and solutions to
these questions.
I press the power switch, but my notebook computer G-MAX
N512 does not start or boot-up.
Look at the Power indicator:
•
If it is not lit, no power is being applied to your notebook computer G-MAX
N512. Check the following:
•
If you are running on battery power, it may be low and unable to power
your notebook computer G-MAX N512. Connect the AC adapter to
recharge the battery pack.
•
Make sure the AC adapter is plugged in properly to your notebook
computer G-MAX N512 and to the power outlet.
•
If it is lit, check the following:
•
If the Standby indicator is lit, your notebook is in Standby mode. Press
any key or tap on the touchpad to resume.
•
Is a non-bootable (non-system) diskette in the floppy drive? Remove or
replace it with a system diskette and press Ctrl-Alt-Del to restart the
system.
The operating system files may be damaged or missing. Insert the startup disk
you created during Windows setup into the floppy drive and press Ctrl-Alt-Del
to restart the system. This will diagnose your system and make necessary
fixes.
Nothing appears on the screen.
Your notebook computer G-MAX N512’s power management system
automatically blanks the screen to save power. Press any key to turn the
display back on.
If pressing a key does not turn the display back on, two things might be the
cause:
•
The brightness level might be too low. Press Fn + F8 to adjust.
•
The display device might be set to an external monitor. Press the display
toggle hot key Fn + F4 to toggle the display back to your notebook
computer G-MAX N512.