manualshive.com logo in svg

Gigabyte E283-Z90-AAD1, Руководство пользователя, Страница: 165 / 167

Поделиться
Скачать
Gigabyte E283-Z90-AAD1 Скачать руководство пользователя страница 165

BIOS Setup

- 165 -

5-9  Save & Exit Menu

The Save & Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit 
options then press <Enter>

.

 

Parameter

Description

Save Options

Save Changes and Exit

Saves changes made and closes the BIOS setup. 
Options available: Yes, No.

Discard Changes and Exit

Discards changes made and exits the BIOS setup.
Options available: Yes, No.

Save Changes

Saves changes done so far to any of the setup options.
Options available: Yes, No.

Default Options

Restore Defaults

Loads the default settings for all BIOS setup parameters. Setup Defaults 
are quite demanding in terms of resources consumption. If you are using 
low-speed memory chips or other kinds of low-performance components 
and you choose to load these settings, the system might not function 
properly.
Options available: Yes, No.

Boot Override

Press [Enter] to configure the device as the boot-up drive.

Launch EFI Shell from

filesystem device

Attempts to Launch EFI Shell application (Shell.efi) from one of the
available file system devices.

Содержание E283-Z90-AAD1








































































































































































Отзывы:

Нет отзывов