background image

 

&

UMA Frame Buffer Size

 (Note)

 

Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. 

MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 64M~2G.

 

This item is configurable only when 

UMA Mode

 is set to 

UMA Specified

.

 

&

Display Resolution

 (Note)

 

Allows you to set the display resolution. Options are: Auto (default), 1920x1080 and below, 2560x1600, 

3840x2160.

 

This item is configurable only when 

UMA Mode

 is set to 

UMA Auto

.

 

&

HD Audio Controller

 

Enables or disables the onboard audio function. (Default: Enabled)

 

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to 

Disabled

.

 

&

PCIEX16 Bifurcation

 

Allows you to determine how the bandwidth of the PCIEX16 slot is divided. Options: Auto, PCIE 2x8, 

PCIE 1x8/2x4, PCIE 2x4/1x8, PCIE 4x4. (Default: Auto)

 

&

Above 4G Decoding

 

Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system 

supports 64-bit PCI decoding). Set to 

Enabled

 if more than one advanced graphics card are installed and 

their drivers are not able to be launched when entering the operating system (because of the limited 4 GB 

memory address space). (Default: Disabled)

 

&

Onboard LAN Controller

 

Enables or disables the onboard LAN function. (Default: Enabled)

 

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to 

Disabled

.

 

ƒ

Super IO Configuration

 

&

Serial Port 1

 

Enables or disables the onboard serial port. (Default: Enabled)

 

ƒ

USB Configuration

 

&

Legacy USB Support

 

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

 

&

XHCI Hand-off

 

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off 

support. (Default: Enabled)

 

&

USB Mass Storage Driver Support

 

Enables or disables support for USB storage devices. (Default: Enabled)

 

&

Port 60/64 Emulation

 

Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support 

for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. 

(Default: Disabled)

 

&

Mass Storage Devices

 

Displays a list of connected USB mass storage devices. This item appears only when a USB storage device 

is installed.

(Note)  This item is present only when you install a CPU that supports this feature.

- 29 -

Содержание B550M AORUS ELITE













































Отзывы: