- 17 -
Hardware Installation Process
English
9) BAT (Battery)
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
If you want to erase CMOS...
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery, wait for 30 second.
3. Re-install the battery.
4. Plug the power cord and turn ON the computer.
Pin No. Definition
1
MIC
2
GND
3
REF
4
POWER
5
FrontAudio(R)
6
RearAudio(R)
7
Reserved
8
No Pin
9
FrontAudio (L)
10
RearAudio(L)
1
10
9
2
+
10) F_AUDIO (Front Audio Panel Connector)
If you want to use Front Audio connector, you must remove jumpers on pins 5-6, 9-10. In order to
utilize the front audio header, your chassis must have front audio connector. Also please make sure
the pin assigments on the cable are the same as the pin assigments on the MB header. To find out if
the chassis you are buying support front audio connector, please contact your dealer. Please note,
you can have the alternative of using front audio connector or of using rear audio connector to play
sound.
