Gigabyte 6WXM, Руководство пользователя

Страница: 4 / 108

Quick Installation Guide
2
I. Quick Installation Guide :
CPU SPEED SETUP
The system bus frequency can be switched between 66
¡ B
100MHz and
by adjusting JP6 & JP28 (See Figure-1). The CPU Frequency is
control by BIOS.
M
The CPU speed must match with the frequency RATIO. It will cause
system hanging up if the frequency RATIO is higher than that of
CPU.
JP6 / JP28: System Bus Speed
6WXM
ICH/
82801
82810/
82810E
AC97
YMF
744
Main
BIOS
Backup
BIOS
IT8888
JP6
1
CPU JP6 JP28
AUTO 1-2 1-2
66 2-3 2-3
100 NC 2-3
133 NC NC
1
JP28
Figure-1
«
Note: Please set the CPU host frequency in accordance with your
processor’ s specifications. We don’ t recommend you to set the
system bus frequency over the CPU’ s specification because these
specific bus frequencies are not the standard specifications for
CPU, chipset and most of the peripherals. Whether your system can
run under these specific bus frequencies properly will depend on
your hardware configurations, including CPU, Chipsets, SDRAM,
Cards… .etc.
«
Note: JP28 is only available when the motherboard use 82810E
Chipset.