- 67 -
BIOS Setup
5-2-10
Network Stack Configuration
Parameter
Description
Network Stack
Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is
Enabled
.
Ipv4 PXE Support
Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is
Enabled
.
Ipv4 HTTP Support
Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is
Disabled
.
Ipv6 PXE Support
Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is
Enabled
.
Ipv6 HTTP Support
Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is
Disabled
.
PXE boot wait time
Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.
Media detect count
Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.
Содержание 6NE152ZE0MR-00
