24
③
Audio output level:
This menu is not available. (This menu is for the model with
AES/EBU audio output.)
④
Input File Loader
:
If put a check mark on [Enabled] box, all the files in the directory that
is designated on the Load Directory window are automatically loaded in the material list
when the application is booted.
⑤
Control Mode:
Selects Clip list mode or Playlist mode. The following selection menu
opens by clicking the right tab.
Single file mode
--- The mode that only one selected clip can be played back.
Playlist mode
--- You can playback plural clips continuously in this mode.
⑥
Set reference timing: Adjusts Gen-lock phase. For adjustment, move the slide bar or put
digits -511 to +511 in the window then click the [Apply] button.
⑦
Character Output:
Determines whether the characters are inserted or not.
ON
--- Enables the character insertion.
Timecode
--- Timecode can be displayed.
Status
--- Deck status (REC, PLAY, STOP etc) can be displayed.
⑧
MJPEG interlace mode:
Selects interlace mode when playback the Motion JPEG file.
The default mode is the [TOP], but there is a case that the ODD/EVEN relationship
becomes abnormal for some MJPEG files. In this case, you can select the other mode.
⑨
Audio monitor channel select
:
Selects channel pair (1/2, 3/4, 5/6, 7/8) for the playback
audio meter.
⑩
Variable audio mute:
Enables audio mute in variable play back mode. Without check
mark, audio can be output even in the variable playback (JOG, Slow or Shuttle).
⑪
UDP Remote Enable:
Put a check mark in the box if you use the Ethernet UDP remote
control.
⑫
GPI Cue Point:
Designate the CUE-UP offset of the GPI interface (OPTION). The default
value is [00:00:00:00].
⑬
Repeat:
Enables repeat (LOOP) playback.
⑭
Timecode out:
Selects time code output on the HD-SDI (RP-188 specification). The
VITC, VITC2, LTC or Disable can be selected.
⑮
OK button:
Sets the new settings.
⑯
Cancel button:
Cancels the new settings.