Introduction
Giga-tronics GT-1040A Microwave Power Amplifier
6
Operation Manual, Part Number 34981, Rev. A, January 2011
2.4
Prepare the GT-1040A for Use
2.4.1
Cooling
The GT-1040A has an internal cooling fan. The air intake is located on the rear panel of the instrument. When
using the GT-1040A, ensure there are no obstructions to the flow of air into or out of the instrument.
2.4.2
AC Power Requirements
AC Power Requirements:
See Table 10 on page 13
2.5
Shipping, Repair, and Calibration
2.5.1
Shipping the GT-1040A
If it is necessary to ship the GT-1040A, observe the following:
•
Use the best packaging materials available. If possible, reuse the original shipping container.
•
If the original shipping container is not available, use a strong carton (350 lbs./sq.in. bursting strength) or a
wooden box.
•
Wrap the amplifier in heavy paper or plastic before placing it into the shipping container.
•
Completely fill the areas on all sides of the amplifier with packaging material. Take extra precaution to
protect the front and rear panels.
•
Seal the package with strong tape or metal bands. Mark the outside of the package clearly, and in bold type,
as follows:
FRAGILE — DELICATE INSTRUMENT
