Giga-tronics ASCOR SERIES 8000 Getting Started Guide Rev. C
Getting Started Guide, Part Number 07507593, Rev C, August 14, 2013
22 of 38
5.2
Configuration Web Page
Configuration Page allows you to change the IP Address and the Net Mask to the desired
values.
Figure 19 - Configuration Web Page
Enter the new IP address and set the Net Mask to 255.255.255.0:
Click on Update Flash button.
Wait for the web page to switch to the Confirmation page.
5.3
Other Configuration Web Page Settings:
Following are some other setting available under the Configuration page. These setting
do not have to be changed for changing the IP address but are presented here for
completeness.
Comm Timeout (in seconds): If the Series 8000 Switch senses no client communication
for more than the Comm Timeout setting, then the Series 8000 Switch will close the
socket, release any locks, and reclaim all associated instrument resources. Use of a short
setting of 3-5 minutes is recommended during the debugging stages to recover broken
