Giga-tronics 8003, Руководство по эксплуатации

Страница: 175 / 258

Remote Operation
Manual 20791, Rev. C, June 2001 3-33
3.3.20 Plot Command Structure
PLOT
Syntax: PLOT us modifier [ us modifier] [ us SRQ]
Examples: PLOT;ALL;SRQ
Full size plot of all parameters, assert SRQ when done.
PLOT;LOWR;SRQ
Plot in lower right quadrant, assert SRQ when done.
PLOT;CUSTOM;GRID;FREQ_LB;SRQ
Custom plot of grid and frequency labels only, assert SRQ when done.
PLOT;CUSTOM;SCALE
Make analyzer read new P1, P2 plotter coordinates
PLOT;CUSTOM;DEF_LOGO;NEW LOGO
Plots NEW LOGO instead of Giga-tronics logo
Modifiers: Does a full size plot with all parameters
Modifier name: ALL
Modifier syntax: ALL
Modifier Description: Does a plot in the upper left ( UPL ), upper right ( UPR ),
lower left ( LOWL ), or lower right ( LOWR ) quadrants of
the paper.
Modifier name: UPL, UPR, LOWL, or LOWR
Modifier syntax: UPL, UPR, LOWL, or LOWR
Modifier Description: Does a special plot of trace only ( SP_TRACE ), labels
only ( SP_LABEL ), or frequencies only ( SP_FREQ ).
Modifier name: SP_TRACE, SP_LABEL, or SP_FREQ
Modifier syntax: SP_TRACE, SP_LABEL, or SP_FREQ
Modifier Description: Asserts GPIB SRQ at the end of a plot. The system
controller would normally use an interrupt service
routine to take action once the analyzer asserts
SRQ .
An SRQ can be cleared by doing a GPIB serial poll of
the analyzer.
Modifier name: SRQ
Modifier Description: Does a custom plot with user defined features. The
modifier
CUSTOM should be followed by a set of modifi-
ers that define the custom plot (see examples next
page).