13
Step 3. ID Filter
Click [ID Filter] to set the card format of data output that you want PCR340 to send.
Select the [Card Type] and set [Range] and [Length] of data information. Then click
[Write] to save the settings to PCR340.
Step 4. Format
Click [Format]. Set [Prefix] code, [Postfix] code, [OnRemove] message and [Delimiter]
if necessary. If you want PCR340 to send the card type when the card is read, check
[Display Card Type] checkbox. Then click [Write] to save the settings to PCR340.
Drag
(
start)
&
(end) to
change the range
[1K] = card type
Select Hex/Dec Filter
Select the output in MSB
or LSB
Select the output in Hex or
Dec
