GIGA-TMS DSP860, Руководство по установке, Страница: 4 / 8

3
3. Insert the tab on the Display (or the extension Pillar) into the
hole on the Stand until you feel it clicked.
4.
Connect the cable from the Display to the RJ connector (TO
DSP) inside the Stand until you feel it clicked.
Also connect the enclosed D-connector cable (CABLE TO
PC) to the “ To Host ” connector and plug the power cable
(POWER CABLE FROM PC) into the DC Jack (DC 12V)
and connect the optional Printer D-connector cable (CABLE
TO PRINTER) to the “ To Printer ” connector when needed
Note:CABLE TO PRINTER (WAS-1539) is an optional
item You may order it when needed.