GIGA-BYTE TECHNOLOGY R282-P91 Скачать руководство пользователя страница 25

Страница: 25 / 99

- 25 -

System Hardware Installation

3-6 Removing and Installing Memory

3-6-1

Eight-Channel Memory Configuration

This motherboard provides 32 DDR4 memory sockets and supports Eight Channel Technology. After the

memory is installed, the BIOS will automatically detect the specifications and capacity of the memory.

CPU1

CPU0

DIMM_P0_E

DIMM_P0_H

DIMM_P0_G

DIMM_P0_F

DIMM_P0_E

DIMM_P0_H

DIMM_P0_D

DIMM_P0_A

DIMM_P0_B

DIMM_P0_C

DIMM_P0_D

DIMM_P0_A

DIMM_P1_L

DIMM_P1_I

DIMM_P1_J

DIMM_P1_K

DIMM_P1_L

DIMM_P1_I

DIMM_P1_M

DIMM_P1_P

DIMM_P1_O1

DIMM_P1_O0

DIMM_P1_N

DIMM_P1_M

DIMM_P1_P

Read the following guidelines before you begin to install the memory:
• Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one

direction. If you are unable to insert the memory, switch the direction.

Содержание R282-P91




































































































Результаты поиска

Содержание R282-P91

Отзывы:

GIGA-BYTE TECHNOLOGY R282-P91, Руководство пользователя, Страница: 25 / 99

Результаты поиска

Содержание R282-P91

Отзывы: