manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY R281-2O0, Руководство по обслуживанию

Поделиться
Скачать
GIGA-BYTE TECHNOLOGY R281-2O0 Скачать руководство пользователя страница 112

BIOS Setup

- 112 -

5-6  Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error 

message if the legacy drive(s) specified is not bootable. 

  Boot Configuration

  Setup Prompt Timeout

 

Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting.

 

Press the numeric keys to input the desired values.

  Bootup NumLock State

 

Enable/Disable the Bootup NumLock function.

 

Options available: On/Off. Default setting is 

On

.

  Quiet Boot   

 

Enable/Disable showing the logo during POST.

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  Boot mode select   

 

Selects the boot mode.

 

Options available: LEGACY/UEFI. Default setting is 

UEFI

.

  FIXED BOOT ORDER Priorities
  Boot Option #1/#2/#3/#4/#5

 

Press [Enter] to configure the boot priority. 

        By default, the server searches for boot devices in the following secquence: 

 

1.  Hard drive.
2.  CD-COM/DVD drive.
3.  USB device.
4.  Network.
5.  UEFI.

Содержание R281-2O0





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды