GIGA-BYTE TECHNOLOGY H410M S2 V2 страница 13 Скачать руководство пользователя

Страница: 13 / 43

DEBUG

PORT

G.QBOFM

ATX

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used (500W or greater). If a power supply is used that does not provide the

required power, the result can lead to an unstable or unbootable system.

ATX:

Pin No. Definition

3.3V

-12V

GND

+5V

PS_ON (soft On/Off)

GND

+5V

GND

Power Good

5VSB (stand by +5V)

+5V

+12V

+5V

+12V (Only for 2x12-pin

ATX)

+5V (Only for 2x12-pin ATX)

3.3V (Only for 2x12-pin

ATX)

GND (Only for 2x12-pin ATX)

1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

on the motherboard. Before connecting the power connector, first make sure the power supply is turned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

ATX_12V_2X4:

Pin No. Definition

GND (Only for 2x4-pin 12V)

+12V (Only for 2x4-pin 12V)

GND (Only for 2x4-pin 12V)

+12V (Only for 2x4-pin 12V)

GND

+12V

GND

+12V

DEBUG

PORT

G.QBOFM

ATX_12V_2X4

3/4) CPU_FAN/SYS_FAN (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is

the ground wire). The speed control function requires the use of a fan with fan speed control design. For

optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

•

Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•

These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.

CPU_FAN

DEBUG

PORT

G.QBOFM

SYS_FAN

Pin No. Definition

GND

Voltage Speed Control

Sense

PWM Speed Control

DEBUG PO

G.QBOFM

Connector

CPU_FAN SYS_FAN

Maximum Current

Maximum Power

24W

- 13 -

Содержание H410M S2 V2












































Результаты поиска

Содержание H410M S2 V2

Отзывы:

Похожие инструкции для H410M S2 V2

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY H410M S2 V2, Руководство пользователя

Результаты поиска

Содержание H410M S2 V2

Отзывы:

Похожие инструкции для H410M S2 V2

Бренды по названию

Популярные бренды