GIGA-BYTE TECHNOLOGY GA-Z270-HD3P, Руководство пользователя

Страница: 24 / 44

&
System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
&
Memory Ref Clock
Allows you to manually adjust the memory reference clock. (Default: Auto)
&
Memory Odd Ratio(100/133 or 200/266)
Enabled allows Qclk to run in odd frequency. (Default: Auto)
&
Memory Frequency (MHz)
The first memory frequency value is the normal operating frequency of the memory being used; the second
is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.
`
Advanced Memory Settings
&
Extreme Memory Profile (X.M.P.)
(Note)
, System Memory Multiplier, Memory Ref Clock,
Memory Odd Ratio(100/133 or 200/266), Memory Frequency(MHz),
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
&
Memory Boot Mode
(Note)
Provides memory detection and training methods.
Auto Lets the BIOS automatically configure this setting. (Default)
Normal The BIOS automatically performs memory training. Please note that if the system
becomes unstable or unbootable, try to clear the CMOS values and reset the board
to default values. (Refer to the introductions of the battery/clear CMOS jumper in
Chapter 1 for how to clear the CMOS values.)
Enable Fast Boot Skip memory detection and training in some specific criteria for faster memory
boot.
Disable Fast Boot Detect and train memory at every single boot.
&
Memory Enhancement Settings
Provides several memory performance enhancement settings: Normal (basic performance), Relax OC,
Enhanced Stability, and Enhanced Performance. (Default: Normal)
&
Memory Timing Mode
Manual and Advanced Manual allows the Memory Multiplier Tweaker , Channel Interleaving , Rank
Interleaving , and memory timing settings below to be configurable. Options are: Auto (default), Manual,
Advanced Manual.
&
Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled , the
value is displayed according to your memory specification. When Extreme Memory Profile (X.M.P.) is set
to Profile1 or Profile2 , the value is displayed according to the SPD data on the XMP memory.
&
Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
&
Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
&
Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
(Note) This item is present only when you install a CPU and a memory module that support this feature.
- 24 -