GIGA-BYTE TECHNOLOGY GA-H97M-D3H Скачать руководство пользователя страница 29

Страница: 29 / 40

- 29 -

Intel Processor Graphics

Enables or disables the onboard graphics function. (Default: Enabled)

Intel Processor Graphics Memory Allocation

Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)

DVMT Total Memory Size

Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.

(Default: MAX)

Intel(R) Rapid Start Technology

Enables or disables Intel

Rapid Start Technology. (Default: Disabled)

Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

XHCI Hand-off

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off

support. (Default: Enabled)

EHCI Hand-off

Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off

support. (Default: Disabled)

USB Storage Devices

Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.

Two Layer KVM Switch

Set to

Enabled

to ensure proper device functionality when chaining two KVM switches. (Default: Disabled)

OnBoard LAN Controller

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled

SATA Coniguration

Integrated SATA Controller

Enables or disables the integrated SATA controllers. (Default: Enabled)

SATA Mode Selection

Enables or disables RAID for the SATA controllers integrated in the Chipset or conigures the SATA controllers

to AHCI mode.

IDE

Conigures the SATA controller to IDE mode.

RAID

Enables RAID for the SATA controller.

AHCI

Conigures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI)

is an interface speciication that allows the storage driver to enable advanced Serial ATA

features such as Native Command Queuing and hot plug. (Default)

Serial ATA Port 0/1/2/3/4/5

Port 0/1/2/3/4/5

Enables or disables each SATA port. (Default: Enabled)

Hot plug

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

External SATA

Enables or disables support for external SATA devices. (Default: Disabled)

Содержание GA-H97M-D3H









































Результаты поиска

Содержание GA-H97M-D3H

Отзывы:

GIGA-BYTE TECHNOLOGY GA-H97M-D3H, Руководство пользователя, Страница: 29 / 40

Результаты поиска

Содержание GA-H97M-D3H

Отзывы: