GIGA-BYTE TECHNOLOGY GA-H170M-DS3H Скачать руководство пользователя страница 6

Страница: 6 / 44

1-2 Product Specifications

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/

Intel

Celeron

processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

H170 Express Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR4 2133 MHz memory modules

Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz

* Support for HDMI 1.4 version.

Support for up to 3 displays at the same time

Maximum shared memory of 512 MB

Audio

Realtek

ALC887 codec

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Realtek

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

2 x PCI Express x1 slots

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Multi-Graphics

Technology

Support for 2-Way AMD CrossFire

™

technology

Storage Interface

Chipset:

- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe

x4/x2/x1 SSD support)

- 2 x SATA Express connectors

- 6 x SATA 6Gb/s connectors

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

* Refer to "1-7 Internal Connectors," for the supported configurations with the M.2,

SATA Express, and SATA connectors.

- 6 -

Содержание GA-H170M-DS3H













































Результаты поиска

Содержание GA-H170M-DS3H

Отзывы:

GIGA-BYTE TECHNOLOGY GA-H170M-DS3H, Руководство пользователя, Страница: 6 / 44

Результаты поиска

Содержание GA-H170M-DS3H

Отзывы: