GIGA-BYTE TECHNOLOGY GA-H110MSTX-HD3, Руководство пользователя

Страница: 18 / 39

15) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
•
After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).
Open: Normal
Short: Clear CMOS Values
16) USB30 (USB 3.0/2.0 Port)
The USB port makes it easier to save data, flash the BIOS or install software in open bench testing platforms
for simply pretesting the PC before final component installation inside a case scenarios where accessing
the rear panel IO can be an inconvenience.
F_USB3 (Front Panel) HP_MIC/MIC
TYPEC
17) TYPEC (USB Type-C
™
Port)
The reversible USB port supports the USB 3.0 specification and is compatible to the USB 2.0 specification.
Use this port for USB devices.
F_USB3 (Front Panel) HP_MIC/MIC
TYPEC
- 18 -