GIGA-BYTE TECHNOLOGY GA-B250M-Gaming 5 Скачать руководство пользователя страница 11

Страница: 11 / 44

1-6 Back Panel Connectors

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0

specification. You can connect a USB DAC to this port or use this port for USB devices.

DVI-D Port

(Note)

The DVI-D port conforms to the DVI-D specification and supports a maximum resolution of 1920x1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

DVI-D connection to this port.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD

Master Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 4096x2160@24 Hz, but the actual resolutions supported are dependent on the monitor

being used.

(Note) The DVI-D port does not support D-Sub connection by adapter.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The

item name may differ depending on your operating system.)

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices. You can connect a

USB DAC to this port or use this port for USB devices.

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

State

Description

Blinking

Data transmission or receiving is occurring

No data transmission or receiving is occurring

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0

specification. Use this port for USB devices.

- 11 -

Содержание GA-B250M-Gaming 5













































Результаты поиска

Содержание GA-B250M-Gaming 5

Отзывы:

Похожие инструкции для GA-B250M-Gaming 5

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY GA-B250M-Gaming 5, Руководство пользователя

Результаты поиска

Содержание GA-B250M-Gaming 5

Отзывы:

Похожие инструкции для GA-B250M-Gaming 5

Бренды по названию

Популярные бренды