background image

- 10 -

1-6  Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200 

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports 

D-Sub connection to this port.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD 

Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM 

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported 

resolution is 4096x2160, but the actual resolutions supported are dependent on the monitor being used.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State 

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

State 

Description

Blinking

Data transmission or receiving is occurring

Off

No data transmission or receiving is occurring

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification. 

Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following 

describes the states of the LAN port LEDs.

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

Dual Display Configurations for the Onboard Graphics:

 

Dual display configurations are supported after you install motherboard drivers in OS.

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB 

keyboard/mouse, USB printer, USB flash drive and etc.

Line In Jack (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to 

connect front speakers in a 4/5.1/7.1-channel audio configuration.

Содержание GA-AM1M-S2H

































Отзывы: