manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-6LXSG, Руководство пользователя, Страница: 66 / 99

Поделиться
Скачать
GIGA-BYTE TECHNOLOGY GA-6LXSG Скачать руководство пользователя страница 66

BIOS Setup

- 66 -

2-2-14  Intel(R) Rapid Start Technology

  Intel(R) Rapid Start Technology

 

Enable/Disable Intel(R) Rapid Startt Technology.   

 

Options available: Enabled/DIsabled. Default setting is 

Enabled

.

  Entery on S3 RTC Wake

 

Enable/Disable Enterr on S3 RTC Wake.   

 

Options available: Enabled/DIsabled. Default setting is 

Enabled

.

  Enter After

 

Define S3 RTC Wake time. Press <+> / <-> keys to increase or decrease the desired values.

  Active Page Threshold Support

 

This feature allows Intel Rapid Start Technology to work with a partition size less than the amount of 
DRAM on the system.

 

Options available: Enabled/DIsabled. Default setting is 

Disabled

.

  Hybird Hard Disk Support

 

Options available: Enabled/DIsabled. Default setting is 

Disabled

.

  RapidStart Display Save/Restore

 

Options available: Enabled/DIsabled. Default setting is 

Disabled

.

Содержание GA-6LXSG




































































































Отзывы:

Нет отзывов