manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY G292-Z20, Руководство пользователя, Страница: 59 / 142

Поделиться
Скачать
GIGA-BYTE TECHNOLOGY G292-Z20 Скачать руководство пользователя страница 59

- 59 -

BIOS Setup

5-1  The Main Menu

Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use 
arrow keys to move among the items and press <Enter> to accept or enter other sub-menu.

Main Menu Help

The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.

Submenu Help

While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the 
menu. Press <Esc> to exit the help screen. Help for each item is in the Item Help block on the right side of 
the submenu.

      

•  When the system is not stable as usual, select the 

Restore Defaults

 item to set your system  

   

 

to its defaults. 

      

•  The BIOS Setup menus described in this chapter are for reference only and may differ by  

   

 

BIOS version.

Parameter

Description

BIOS Information
Project Name

Displays the project name information.

Project Version

Displays version number of the BIOS setup utility.

Build Date and Time

Displays the date and time when the BIOS setup utility was created.

BMC Information
BMC Firmware Version

Displays version number of the BIOS setup utility.

Содержание G292-Z20















































































































































Отзывы:

Нет отзывов