GIGA-BYTE TECHNOLOGY G191-H44, Руководство по обслуживанию

Страница: 32 / 114

System Hardware Installation - 32 -
3-5 Installing the GPU Card
Follow these instructions to install the GPU card:
1. Remove the three screws securing the GPU card bracket.
2. Lossen the thumbscrews securing the GPU card bracket.
3. Slightly lift the GPU card bracket up in the direction indicated as shown in the image below.
4. Insert the GPU card into the selected slot. Make sure the GPU card is properly seated.
5. Install the two screws to secure the GPU card in place.
6. Install the three screws to secure the GPU card bracket in place.
Before you install the GPU card:
Voltages can be present within the server whenever an AC power source is connected. This voltage
is present even when the main power switch is in the off position. Ensure that the system is
powered down and all power sources have been disconnected from the server prior to installing a
GPU card. Make sure the system is not turned on or connected to AC power.
Failure to observe these warnings could result in personal injury or damage to the equipment.
3
4
5
1
3
5
4
2
3
4
4
5
6
7
2
1
1
3
4
4
5
1
2
3
1