background image

1-2  Product Specifications

CPU

 

Š

Support for 10th Generation Intel

®

 Core

 i9 processors/Intel

®

 Core

 i7 processors/

Intel

®

 Core

 i5 processors/Intel

®

 Core

 i3 processors/Intel

®

 Pentium

®

 processors/

Intel

®

 Celeron

®

 processors in the LGA1200 package

(Go to GIGABYTE's website for the latest CPU support list.)

 

Š

L3 cache varies with CPU

Chipset

 

Š

Intel

®

 B460 Express Chipset

Memory

 

Š

Intel

®

 Core

 i9/i7 processors:

-  Support for DDR4 2933/2666/2400/2133 MHz memory modules

 

Š

Intel

®

 Core

 i5/i3/Pentium

®

/Celeron

®

 processors:

-  Support for DDR4 2666/2400/2133 MHz memory modules

 

Š

 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) 

of system memory

 

Š

Dual channel memory architecture

 

Š

 Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in 

non-ECC mode)

 

Š

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

 

Š

Support for Extreme Memory Profile (XMP) memory modules

 

 (Go to GIGABYTE's website for the latest supported memory speeds and memory 

modules.)

Onboard 

Graphics

 

Š

Integrated Graphics Processor-Intel

®

 HD Graphics support:

-  1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

-  1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

*  The DVI-D port does not support D-Sub connection by adapter.

 

Š

Maximum shared memory of 512 MB

Audio

 

Š

Realtek

®

 ALC887 codec

 

Š

High Definition Audio

 

Š

2/4/5.1/7.1-channel

*   To configure 7.1-channel audio, you need to open the audio software and select Device 

advanced settings > Playback Device to change the default setting first. Please visit 

GIGABYTE's website for details on configuring the audio software.

LAN

 

Š

Realtek

®

 GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

 

Š

1 x PCI Express x16 slot, running at x16

 

Š

2 x PCI Express x1 slots

(The PCI Express slots conform to PCI Express 3.0 standard.)

Storage Interface  

Š

 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/

x2 SSD support)

 

Š

6 x SATA 6Gb/s connectors

 

Š

Support for RAID 0, RAID 1, RAID 5, and RAID 10

*   Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA 

connectors.

 

Š

Intel

®

 Optane

 Memory Ready

USB

 

Š

Chipset:

-   6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through 

the internal USB header)

-   6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through 

the internal USB headers)

- 6 -

Содержание B460M D2V












































Отзывы: