GIGA-BYTE TECHNOLOGY A520M S2H Скачать руководство пользователя страница 30

Страница: 30 / 41

3DMark01 Enhancement

Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)

IOMMU

Enables or disables AMD IOMMU support. (Default: Auto)

AMD CPU fTPM

Enables or disables the TPM 2.0 function integrated in the AMD CPU. (Default: Disabled)

Trusted Computing

Enables or disables Trusted Platform Module (TPM).

AMD CBS

This sub-menu provides AMD CBS-related configuration options.

PC Health

Reset Case Open Status

Disabled

Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled

Clears the record of previous chassis intrusion status and the

Case Open

field will

show "No" at next boot.

Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To

clear the chassis intrusion status record, set

Reset Case Open Status

Enabled

, save the settings to

the CMOS, and then restart your system.

CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/ +3.3V/+5V/+12V/VCORE SOC

Displays the current system voltages.

Smart Fan 5

Monitor

Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)

Fan Speed Control

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal

Allows the fan to run at different speeds according to the temperature. You can adjust

the fan speed with System Information Viewer based on your system requirements.

(Default)

Silent

Allows the fan to run at slow speeds.

Manual

Allows you to control the fan speed in the curve graph.

Full Speed

Allows the fan to run at full speeds.

Fan Control Use Temperature Input

Allows you to select the reference temperature for fan speed control.

Temperature Interval

Allows you to select the temperature interval for fan speed change.

Fan Control mode

Auto

Lets the BIOS automatically detect the type of fan installed and sets the optimal control

mode. (Default)

Voltage

Voltage mode is recommended for a 3-pin fan.

PWM

PWM mode is recommended for a 4-pin fan.

Fan Stop

Enables or disables the fan stop function. You can set the temperature limit using the temperature curve.

The fan stops operation when the temperature is lower than the limit. (Default: Disabled)

- 30 -

Содержание A520M S2H










































Результаты поиска

Содержание A520M S2H

Отзывы:

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY A520M S2H, Руководство пользователя

Результаты поиска

Содержание A520M S2H

Отзывы:

Бренды по названию

Популярные бренды