19
Attach to the bonnet
using 4 nuts and bolts, it
will look like this.
These 3 parts make
the roof panel.
Assemble like this
using 4 bolts.
Now attach the front
panel to the roof
panel with 1 bolt.
Attach the left hand
panel you made in
steps 3-4 with 4 bolts.
Your model should
look like this.
Attach the right hand
panel in the same
way.
Turn the model over,
you can start to see a
Camper Van now.
Use these parts to join
the front to the sides.
Assemble like this using
a ‘P’ bolt at the top and a
std. bolt at the bottom.
These parts are
required for the back
panel.
Assemble the parts like
this.
31
The Camper Van will
now have a solid
frame.
30
32
Attach the blue back
panel ‘A3’ using 4
bolts.
Now to build the
seats. Gather these
parts together.
Join parts ‘S’ and ‘G’ to
form two long seat
supports.
17
18
20
21
23
22
24
25
27
26
28
29
13
15
Here is the view from
the other side.
14
16
These round domes
form the headlights.
Use the screwdriver to
align the holes. Bolt
them on with bolts ‘P’.
Three parts make the
front bumper.
N x 3
O x 2
N x 2
P x 2
A2
Q x 1
R x 2
small
gap
big
gap
I X 2
G x 2
P X 2
C x 2
F x 2
N
C
F
A3
T x 6
S x 2
U x 12
G x 2