MATRIXX
7
Checking of delivery
Check, when unpacking the fixture that no parts are missing. Your aquatic dealer needs to be informed about any
damage immediately in order to check on a possible claim within the warranty period.
Remove the system from
the box along with all additional parts:
§
lightbody MATRIXX with splash water shield
§
fluorescent tubes
§
hanging suspension kit –
OPTION
§
aquarium mounting brackets –
OPTION
§
warranty card
Assembling the light
The assembly of the fixture should only be carried out after it has been it removed from the ceiling / wall and
after disconnecting it from the mains. Remove one of the side profiles by unscrewing the both screws. Now the
acrylic glass can easily be removed.
The reflectors and cover glasses are secured with films in the delivery status. These films must be
removed before start to protect the risk of irreversible burning-in of the film. The fixture may be used
only with all lamps deployed.
The bulbs and tubes should be checked at regular intervals. The tubes have an operation time of approx. 3.000
hours. They should be renewed after this time as the light performance becomes poorer, a change which cannot
be detected by the human eye.
The tubes and the contacts are to be pushed into the socket evenly, if necessary, exert a slight pressure in order to
press the movable socket against the springs. After having inserted the tubes turn them by 90° until they fit prop-
erly.
The reassembly can now be carried out in reverse order to the above mentioned steps.
The splash water shield is made from durable, UV resistant Makrolon. This splash is treated with a special coat-
ing with nanotechnology (ROWApolitus) which prolongs the cleaning significantly. The protective glass should
never be cleaned with harsh or abrasive products.
Electrical installation
This appliance must be earthed and the circuit protected by a suitable fuse.
The unit is supplied with plugs
which have to be plugged into compatible mains sockets. All electrical work should be carried out by an
author-
ised electrician
considering the corresponding regulations. Electrical components and cables should always be
