Working with Cash Control Unit
Transferring Data
18 of 27
User Manual Cash Control Unit 1.0/Edition 12.2009
ID No. 30033908
2.2
Transferring Data
Need to Know
Only tax officers from the Swedish tax agency are permitted to transfer
data and remove the security seals from Cash Control Unit. For more in-
formation on the security seals and where they are placed on Cash Con-
trol Unit see ’1.4 Security Seal’ on page 11.
The product label is found on the bottom of Cash Control Unit (see ’1.5
Product Label’ on page 13).
How to Proceed
No receipts can be processed while data is being transferred from Cash
Control Unit.
Fig. 15
Inserting storage card
To transfer data from Cash Control Unit to a storage card
1. Make sure that the electronic cash register (ECR) is no longer process-
ing receipts.
2. Disconnect Cash Control Unit from the power supply.
3. Remove the seal from the card slot.
4. Insert storage card into the SD slot as depicted in the figure above, ie,
with contacts facing upwards.
5. Reconnect the power.
The green ON LED blinks to indicate startup of Cash Control
Unit. This can take about 30 seconds.
The yellow DATA LED blinks to indicate data transfer to the stor-
age card (see ’1.2 LEDs’ on page 8).
