9
G
.
04
.0
2.
02
The following functions can be displayed:
Resetting the oil volume counter
Resetting of the oil volume counter can be effected in the mode
◊.
:
=> Hold down the key for at least 10 secs.
Press the key, after 5 secs. the displayed value will flash for 5 secs. Subsequently the (old) value remains
on the display again, now release the key and
0
L
appears on the display.
Definition of the momentary consumption target value
Definition of the momentary consumption target value is effected in the mode/function momentary consump-
tion:
=> Hold down the key for at least 30 secs., but 32 secs. at the longest
Press the key, after 25 secs. the displayed momentary consumption will flash for 5 secs. As soon as the
flashing stops, release the key. As confirmation the service symbol and the momentary consumption as the
newly defined target value will flash for 5 secs.
Following a change in burner output (nozzle change, change in pump pressure etc.) the target value must be
redefined as specified above. The old target value is thereby overwritten.
Service function
If the oil flow is reduced by more than 10 % (e.g. in the event of a slowly blocking nozzle, preheater etc.), the
service symbol will appear on the display unit.
The prerequisite for this service function is previous input of the target value (see Definition of the momentary
consumption target value) with correct burner operation.
Deactivation of the service function
Procedure as for definition of the momentary consumption target value, however, hold down the key for longer
than 32 secs. This clears the target value and the service symbol:
=> Hold down the key for at least 32 secs.
Upon being released the service symbol flashes and the zero value on the display flashes for 5 secs. as
confirmation.
Function
Display
Momentary consump-
tion
Oil volume
(resettable)
◊
Oil volume
(total)
S
Total operating hours
Number of
burner startups
Reduced throughput
(see Service function)
Service
000000
l
0000.00
l
/
h
000000
l
0000.00
l
/
h
000000
h
