GIERRE BAKETEK 0564E Series, Инструкция по установке, использованию и техническому обслуживанию

Страница: 55 / 166

55
GB
Fig. 21
D
A
A
C
B
Fig. 19
Fig. 20
Handle and catch
Proceed as follows:
• ;
• undo the screws ;
• replace the handle and refit all parts in reverse order;
• if necessary, turn the nut of the catch clockwise or anti-clockwise to set the correct closing
of the handle, making sure of the correct orientation of the top of the catch .
(B-Fig. 18)
(A-Fig.19)
(C-Fig.20)
(D-Fig. 20)
only at the model BAKETEK 16... Remove the two parts of the door
Fig. 18
Door seal
The seal is press-fitted, therefore it must be removed by pulling it and refitted by pressing in again
.
This operation carried out by hand
In order not to damage the seal.
(Fig.21)
must be